Home/Store

Pond Bio Filter CPF-5000 (11w) UV

Add to Favorites
Share
R3 779.00
Sold out
Sold out
Pond Bio Filter CPF-5000 (11w) UV
Add to Favorites
Share
Product details

1. PRODUCT OVERVIEW
The Grech CPF-5000 Pond Bio Pressure Filter is designed to provide efficient biological and mechanical filtration for ponds of up to approximately 8,000 litres (up to approximately 4,000 litres when stocked with fish), ensuring clear and healthy water. It features an integrated UV-C clarifier to combat algae and harmful pathogens, along with a convenient cleaning system for easy maintenance.

Key Features:
Biological and mechanical filter chambers for more efficient removal of dissolved and solid waste.
Simple quick handle cleaning system for easy maintenance (no need to open and clean foams all the time).
Enables rapid growth of aerobic bacteria resulting in removal of lethal ammonia and nitrite.
Integrated dirt indicator: a small float pops up on top of the unit when cleaning is required.
Able to cope with higher water flows compared to traditional gravity filters.
Pressurised design allows filtered water to be returned uphill to a maximum height of 3 m (e.g. to a waterfall or stream).


Complete with inlet and outlet hose adapters. Outlet/Inlet hose adapter 3/4 inches~5/4 inches.

2. COMPONENTS AND STRUCTURE
The filter unit consists of several key components working together to ensure optimal water quality.

3. SETUP
Proper setup is crucial for the efficient operation of your pond filter. Follow these steps carefully:
- Placement: Position the filter on a stable, level surface near your pond. Ensure it is easily accessible for maintenance but also discreetly placed if desired. The unit is designed to be partially buried if needed, but ensure the lid remains above ground for access.
- Hose Connections: Use a suitable pond pump (not included) – a pump of approximately 2,000–2,500 L/h is recommended, and the maximum pump capacity is 9,000 L/h. Connect your pond pump’s outlet hose to the filter’s inlet adapter. Use the appropriate size adapter (3/4″, 1 1/4″ are common, check included adapters for exact fit). Secure connections with hose clamps to prevent leaks. Connect the filter’s outlet to your desired water return point in the pond (e.g., waterfall, stream, or direct return).
- Electrical Connection: Ensure the filter’s power cable is routed safely and connected to a GFCI/RCD (earth leakage) protected 230V outdoor electrical outlet. Do not plug in the unit until all water connections are secure and the filter is filled with water.
- Initial Fill: Allow the filter to fill with pond water before starting the pump. This prevents airlocks and ensures proper operation.

4. OPERATING INSTRUCTIONS
Once properly set up, operating the CPF-5000 is straightforward.

- Starting the Filter: After ensuring the filter is filled with water and all connections are secure, plug in your pond pump. Water will begin to flow through the filter. The UV-C lamp will automatically activate once power is supplied to the filter unit.
- Monitoring Performance: Regularly observe the clarity of your pond water. The integrated UV-C clarifier works to reduce green algae and harmful bacteria, contributing to crystal clear water. Check the dirt indicator on top of the unit – when the float pops up, the filter sponges need cleaning (see Section 5.1).

5. MAINTENANCE
Regular maintenance ensures the longevity and efficiency of your CPF-5000 filter.
- Quick Cleaning System
The CPF-5000 features a patented quick cleaning system for the filter sponges, eliminating the need to open the unit frequently. Carry out cleaning whenever the dirt indicator float pops up.
- Activate Cleaning Mode: Turn the flow control knob to redirect water inside the filter to the waste outlet.
- Crank Cleaning: Rotate the crank handle on top of the filter. This mechanism agitates the filter sponges, dislodging accumulated dirt and debris.
- Waste Discharge: Dirty water will be discharged from the waste outlet. You can direct this water to a garden bed or drain. Continue cranking until the discharged water runs clear.
- Return to Filtration: Once cleaning is complete, return the flow control knob to the normal filtration position.
- UV-C Lamp and Quartz Sleeve Maintenance

The UV-C lamp has a limited lifespan and its effectiveness diminishes over time. It is recommended to replace the UV-C lamp annually, typically in spring before the pond season begins. The quartz sleeve should be cleaned periodically to ensure maximum UV-C light penetration.

Replacement: Disconnect power to the unit. Carefully open the filter lid and access the UV-C lamp and quartz sleeve assembly. Follow the specific instructions in the full manual for safe removal and replacement.
Cleaning: Gently clean the quartz sleeve with a soft cloth and warm water to remove any mineral deposits or algae buildup.

- Filter Sponge Replacement
While the quick cleaning system extends the life of the sponges, they will eventually need replacement. The filter contains both coarse (blue) and fine (yellow) sponges for comprehensive mechanical filtration.

6. TROUBLESHOOTING

Here are some common issues and their potential solutions:

Problem Possible Cause Solution

  • Water not clear / Green water Clogged filter sponges, old UV-C lamp,
    insufficient flow rate, oversized pond for filter.
  • Perform quick cleaning. Replace UV-C lamp. Check pump for blockages. Ensure filter is appropriately sized for your pond volume.
  • Water leaking from filter, Improperly sealed lid, damaged Orings, loose hose connections.
    Ensure lid is securely clamped. Inspect and replace damaged O-rings. Tighten all hose connections with clamps.
  • No water flow
    Pump not working, blocked hoses, airlock in filter. Check pump power and operation. Clear any blockages in hoses. Ensure filter is fully primed with water.

7. SPECIFICATIONS

Specification Value
Brand: Grech
Model: CPF-5000
Maximum Pump Capacity Approx. 9,000 L/h
Recommended Pump Flow Approx. 2,000–2,500 L/h (pump not included)
Maximum Outlet Head (uphill return) 3 m
Inlet / Outlet Hose Adapter 3/4″ to 1 1/4″ (check included adapters for exact fit)
Dimensions 16.25″ x 17″ x 16.25″ (approx. 41.3cm x 43.2cm x 41.3cm)
Voltage 230V AC ~50Hz
UV-C Lamp Power 11W
Power Cable Length 4.5 m
Suitable for Ponds with Fish Up to approx. 4,000 Litres
Suitable for Decorative Ponds Up to approx. 8,000 Litres
Item Weight 7.3 Kilograms (approx. 16.1 pounds)
Features Integrated dirt indicator, quick handle cleaning system, built-in UV-C clarifier
Material Plastic (housing)
GTIN [Verify from product label/box]

8. SAFETY INFORMATION
- Always observe basic safety precautions when using electrical appliances, especially near water.
- Ensure the power supply is disconnected before performing any maintenance or cleaning.
- Do not operate the UV-C lamp outside of the filter unit or when exposed to direct view, as UV-C radiation can be harmful to eyes and skin.
- Use only original replacement parts for optimal performance and safety.
- Protect the power cord from damage and ensure it is not a tripping hazard.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Show More
  • Search Products
  • My Account
  • Track Orders
  • Favorites
  • Shopping Bag
  • Gift Cards
Display prices in:ZAR
Skip to main content
Bubbly Fish
Menu
Shop
Contact Us
0732746932bubblyfish.bfn@gmail.com

Bubbly Fish (Pty) Ltd

Shipping & Payment InfoReturn PolicyReport Abuse
Powered by Lightspeed